Fronius Symo 10.0-3-M Serviceanleitung, Ersatzteilliste Seite 149

(3)
Inserting internal fan 2:
(3)
Observe the safety rules (see the begin-
ning of the "Safety" section)
(2)
Disconnect the fan cable (1) from the
1
EcoPS
Use a slotted screwdriver to undo the
2
(1)
expanding rivets (2)
Remove the internal fan module
3
Use a slotted screwdriver to undo the
4
expanding rivets (3)
Remove the internal fan
5
(3)
NOTE!
Ensure the flow of air is away from the
fan holder!
Insert the internal fan
1
Use a slotted screwdriver to press in
2
the expanding rivets (3)
(3)
WARNING!
149