Fronius Symo 10.0-3-M Serviceanleitung, Ersatzteilliste Seite 166

166
(1)
Thread in and connect all cables and
4
(1)
plug connections (1)
(3)
NOTE!
Observe the correct sequence for the
screw joints
Fit the AC cable harness with four 5x10
5
TX25 screws (2)
[3.5 Nm]
Fit the EcoPS with 11 4x9 TX20
(2)
6
screws (3)
[2 Nm]
NOTE!
Ensure that the ferrite cores and their
holders are fitted correctly
Close the inverter and place it in the
7
wall bracket (see "Opening and closing
the device" and necessary „Replacing
the Overvoltage PC board" sections)
Switch on the inverter and then carry out a
fan test via the display (see operating inst-
ructions)