Fronius Symo 10.0-3-M Serviceanleitung, Ersatzteilliste Seite 158

158
(2) (1)
(3)
Connect all cables and plug connec-
4
(2)
tions (3) to the EcoFIL
Fit the Datcom insert with two 5x10
5
TX25 screws (2)
[1.2 Nm]
Fit the ground connection with a 4x9
6
TX20 screw (1)
[2 Nm]
Fit the AC cable harness with four 5x10
7
TX20 screws (4)
[3.5 Nm]
Insert the Recerbo, close the inverter
8
and place it in the wall bracket (see
"Replacing the display PC board -
Recerbo", "Opening and closing the
device" and necessary „Replacing the
(4)
Overvoltage PC board" sections)
Switch on the inverter and then carry out a
fan test via the display (see operating inst-
ructions)