Replacing The External Fan - Fronius 10.0-1 Serviceanleitung

Replacing the ex- Removing the External Fan:
ternal fan
(1)
(2)
(2)
(4)
WARNING! Follow the safety
rules (see start of "Safety" chap-
ter)
Remove the inverter from the wall bra-
1
cket and open (see "Opening and Clo-
sing Device" section)
Loosen fan cable (1) from the PrimoFIL
2
NOTE! Carefully turn the inverter
so that the rear of the inverter can
be accessed.
Remove 2 rubber seals (2)
3
Remove fan cables from the two strain-
4
relief devices
Remove the cable seal (3)
5
Pull out the fan cable
6
(3)
Loosen 8 screws 4x8 TX25 (4) and re-
7
move the air channel plate
131