Setting Backlight; Setting Wallpaper; Time And Date - Motorola MTP850 S Ausführliche Bedienungsanleitung

Setting Backlight

When and where to use: To save the battery power.
Procedure:
1 From the home screen, press the
2 Select Setup → Display → Backlight.
3 Select one of the following:
• Auto – backlight is triggered by turning on the radio, by pressing any key on the device or on the accessory
that is connected to it. Also charging or getting signal from the services like: Call-Out message, RUA request,
DGNA and TX timeout during priority call are going to turn on the backlight.
• Semi Auto – backlight is turning on when you are switching on the radio, pressing assigned button to the
backlight feature, or charging.
• Disabled – backlight is disabled and the display is always dimmed.
• On – backlight is always on.
Note: Setting the backlight intensity level by pressing the B
backlight, and E

Setting Wallpaper

When and where to use: To change the look of the home screen.
Procedure:
1 From the home screen, press the
2 Select Setup → Display → Wallpaper.
3 Select one of the following:
• On — To activate this feature.
• Off — To deactivate this feature.
Setting Contrast
When and where to use: This feature sets the contract of the display to enhanced visibility of the interface.
Procedure:
1 From the home screen, press the
2 Select Setup → Display → Contrast.
3 Use left and right N
4 Press Ok.

Time and Date

This sub-menu controls the displayed time and date on the home screen.
Note: If the Home Display Text Message feature is enabled, Home Mode Display Text may cover time and
date, depending on the Configurable Idle Screen settings.
Note: Infrastructure synchronizes the time and date. When not within the infrastructure signal range you
can set the values manually.
key.
MENU
button backlight intensity.
MERGENCY
key.
MENU
key.
MENU
key to change the value.
AVIGATION
Main Menu | 85
key changes the LED, keypad
ACKLIGHT
| | Send Feedback