Polar CS600X Gebrauchsanleitung Seite 30

ENGLISH
Increased HR / Recovery HR / HR differ.
The difference between heart rate at the beginning and end of the phase. Current
heart rate in beats per minute (bpm), alternating with a percentage of your maximum
heart rate (HR%) or a percentage of heart rate reserve (HRR% ).
Increased HR:
the end, the cycling computer will show the difference in heart rate (heart rate at the
end minus heart rate in the beginning). During the working phase, the cycling
computer will show the increased heart rate value.
Recovery HR:
at the end, the cycling computer will show the difference in heart rate (heart rate in
the beginning minus heart rate at the end). During the recovery phase, the cycling
computer will show the recovery heart rate value.
HR differ:
phase, the cycling computer will show an HR difference value of 0.
Speed
Maximum speed
Average speed
Distance
Split distance
Distance of current phase
Cadence
Maximum cadence
Average cadence of the current phase
Power
Maximum power
Average power of the current phase
Press BACK to return to
* Optional sensor required.
e. Laps
Select File > Exercise log > Basic > Laps
In the Phases information view, see Laps information by pressing DOWN. Laps are shown only if more than
one lap is stored in the memory.
Number of recorded laps/automatic laps
automatic lap information)
Average lap/automatic lap time
Best (fastest) lap/automatic lap number alternating with its time
The last lap is never shown as the best lap, even if it is the fastest lap. If you are in a cycling event and
30 After Training
If heart rate was lower in the beginning of the phase than it was at
If the heart rate was higher in the beginning of the phase than it was
If the heart rate value was the same at the beginning and end of the
*
Phases .
(lap information alternates with