Plus Versions; Setup; Emp Iii E60; Emp Iii E60 Plus - ECOLAB Elados EMP III E60 Betriebsanleitung

Setup

5
5.1

EMP III E60

Fig. 5.1 EMP III E60 (front)
5.2 EMP III E60
Fig. 5.3 EMP III E60
5.3

Indicators / Controls / Jacks

5.3.1

EMP III E60 and EMP III E60

„Dongle box" ports

5.3.2
"Dongle box ports"
Fig. 5.6
417101441_EMP_III_E60.docx
Fig. 5.2 EMP III E60 (side)
PLUS
PLUS
(front) Fig. 5.4 EMP III E60
PLUS
versions
Fig. 5.5 EMP III E60 and EMP III E60
Pos.
1
2
3
4
5
6
I
II
III
IV
Pos. Description
V input for oval gear meter
VI connection for pulse input to EMP pump (input II)
VII input for batch pulse and metering lock
VIII input for pulse, standard signal input and metering lock
Pos.
1
2
3
4
A
B
Pos.
1
2
3
4
A
B
PLUS
(side)
PLUS
versions
Description
Control knob for setting the stroke length
Menu/Exit, up arrow key
Menu/Exit, down arrow key
Start/Stop key (Enter function)
Test key
Graphical display
input for low-level advance warning
and empty report (see 7.2.3,
input for pulse- / standard signal and
metering lock (see 7.2.4, 14.4.1.2
and empty report, fault report and
stroke signal (see 7.2.5, 14.4.1.3
Input of the diaphragm breakage monitoring (see
- 76 -
Description
Diaphragm breakage sequence
Suction valve
(connection on the suction side)
Pump head
Pressure valve
(connection on the pressure side)
Rail for connecting the dongle box
Dongle box
Flow direction of the metering medium
Description
Diaphragm breakage sequence
Suction valve
(connection on the suction side)
Pump head
Pressure valve
(connection on the pressure side)
Rail for connecting the dongle box
Dongle box
Flow direction of the metering medium
14.4.1.1 &14.5.1)
& 14.5.2)
& 14.5.3)
7.2.6 & 14.5.4)
Rev. 12-08.18