Operating Data / Amount Of Pulses; Selecting / Displaying / Deleting - ECOLAB Elados EMP III E60 Betriebsanleitung

10.5.4

Operating data / Amount of pulses

The number of pulses received via the pump's pulse input (plug II pins 3+4, see chapter
"Connector assignment of slot II (5-terminal) Input for pulse signal, standard signal, metering
lock, batch and metering monitoring") since it was first commissioned or last reset is
displayed.

10.5.4.1 Selecting / Displaying / Deleting

Fig. 10.55 Operating data / Amount of pulses: Selecting / Displaying / Deleting
417101441_EMP_III_E60.docx - 115 -
7.2.4
Rev. 12-08.18