General; Ebs Numbers; Transport Damage; Warranty Coverage - ECOLAB Elados EMP III E60 Betriebsanleitung

General

1
This Manual contains all of the instructions for installing, starting up, maintaining & repairing
membrane metering pumps of
IMPORTANT
NOTE
If you have any questions, please contact us under the contact details given in

"Contact address / manufacturer"

chapter 1.4
1.1

EBS numbers

Within this operating instructions article numbers, and EBS numbers are represented. EBS
numbers are
1.2

Transport damage

CAUTION
ATTENTION
1.3

Warranty coverage

Operational safety, reliability and performance of this model are only guaranteed by the
manufacturer if the following conditions are met:
• Mounting, connections, adjustment, service and repair are performed by authorized and
trained personnel.
• The membrane metering pump must be used according to the specifications in the
operating instructions contained in the delivery scope.
• Only original spare parts must be used for repairs.
• The warranty claim is invalidated if the pump housing is opened.
In addition, the general warranty and service conditions of the company
Ecolab Engineering GmbH
1.4 Contact address / Manufacturer
Ecolab Engineering GmbH
Raiffeisenstraße 7
D-83313 Siegsdorf
Telefon (+49) 86 62 / 61 0
Telefax (+49) 86 62 / 61 219
eMail: engineering-mailbox@ecolab.com
417101441_EMP_III_E60.docx
ELADOS
Please note your pump's software version when using these operating instructions
"Software version display").
(see chapter 9.6
The German sections of this manual constitute the ORIGINAL OPERATING MANUAL
and take legal precedence.
All other languages are translations of the ORIGINAL OPERATING MANUAL.
internal article numbers and used only "concern internal".
Ecolab
If there is discovered a transport damage while unpacking the pump, it must not be
installed.
are applicable.

EMP III E60 and ELADOS
Fig. 1.1 QR-Code: Adresse
- 72 -

PLUS
EMP III E60 .
Ecolab Engineering
Rev. 12-08.18