Correct Application - Jungheinrich AM 2200 Betriebsanleitung

A

Correct Application

The truck described in the present operating instructions is an industrial truck designed for lifting and
transporting loads.
It must be used, operated and serviced in accordance with the present instructions. All other types of
use lie beyond the scope of application and can result in damage to personnel, the truck or property.
In particular, avoid overloading the truck with loads which are too heavy or placed on one side. The
maximum permissible load is stated on the truck's data plate. The industrial truck must not be used in
fire or explosion endangered areas, or areas threatened by corrosion or excessive dust.
The owner must ensure that the truck is used only for the purpose for which it is intended and that there
is no danger to life and limb of the user or third parties. The owner must ensure that all truck users
have read and understood these operating instructions.
M
Failure to comply with the operating instructions shall invalidate the warranty. The same applies if
improper work is carried out on the truck by the customer or third parties without the permission of the
manufacturer's customer service department.
The attachment or installation of additional equipment affecting the truck's functionality requires the
written approval of the manufacturer.
The driver is responsible for the truck during the time it is in use. Do not carry or lift other people. Report
any damage and sundry defects to the truck immediately to your supervisor.
The operator must make sure that the load is in a satisfactory condition. Do not carry loads unless they
are positioned safely and carefully. Use suitable precautions to prevent parts of the load from tipping
or falling down.
B Truck Description
1 Application
The vehicle is a pallet truck, designed for transporting goods on level surfaces. Open bottom pallets
or pallets with transverse boards can be lifted beyond the load wheel area. The capacity is shown on
the data plate and on the data capacity plate Qmax.
2 Assemblies, Application Conditions, Data Plate
Operating temperature: from -10°C to +50°C (Electro-plated stainless steel: from -35°C to 40°C)
Ambient lighting: min. 50 Lux
Item Description
1 Steer wheels
2 Tiller
3 "Lift/lower forks" handle
4 Handle
5 Tiller parking brake
6 Load handler
7 Load wheels
8 Data plate
9 Foot parking brake
Data Plate
Type
Option
Serial no.
Year of manufacture
Rated capacity
Net weight
Manufacturer
2
5
S
4
3
H
2
1
9
6
7
8