Led Warning Indicators; Displays - Jungheinrich EFG-DH ac 10 Betriebsanleitung

3.1

LED warning indicators

Four indicator LEDs signal the following states:
Item
25
26
27
28
3.2

Displays

Item Function
29 Drive direction and wheel position indicator
–– In case of trucks without steering angle acquisition, the drive direction is in-
dicated only (arrow pointing up or down)
–– Trucks with steering angle acquisition indicate the drive direction and the
wheel position.
30 Battery capacity indicator
The residual capacity still available is indicated.
Display 0% = battery discharged by 80%.
The Attention LED flashes when 10% and 0% are indicated.
The lifting function is cut out when the capacity is 0%.
31 Operating hours / error display
–– Indicates the operating hours:
–– Eff: Indicates the overall operating hours
Error display:
–– The operating hours display is cleared when an error (Err) or a warning (Inf)
is received. The error code is displayed.
Function
LED “"over temperature”"
–– Lights up in case of drive or lift motor over temperature
–– Lights up in case of drive or lift controller over temperature
LED “"parking brake”"
–– Lights up in case of parking brake applied
LED “"brake fluid”"
–– Lights up in case the brake fluid level is too low
LED ATTENTION
–– Flashes in case of errors (Err) or warnings (Inf)
–– Flashes when the battery capacity is 10% and 0%
E 7