– Drive the truck with the fork tines as far
as possible below the load unit.
f
The fork tines must be under the load
with at least two third of their lengths.
– Pull parking brake (10). Lift fork carrier
until the load is lying freely on the fork
tines.
– Switch driving direction switch (52/18)
to reverse driving and release the
parking brake.
A
Depending on the truck type, the driving
direction switch can be locatede
at the Multi Pilot, (o, figure 1) or
at the adjustment lever, (t, figure 2).
f
Make sure that the way to the rear is free
from obstacles.
– Drive carefully backward until the load is outside of the storage area.
f
Persons are not permitted to stay under-
neath the lifted load!
Do not put your hands through the hoist
frame.
– Incline hoist frame carefully backward.
– Lower the load as far as possible for
the transport (road clearance approx.
150...200 mm).
f
When moving loads the hoist frame
must be inclined backward and the fork
tines must be lowered as far as possible.
E 28
V
52
R
(1)
18
(2)