Driving - Jungheinrich EFG-DH ac 10 Betriebsanleitung

6.2

Driving

f
During operation in electromagnetic fields beyond the admissible limit values uncon-
trolled driving motion can occur.
Press EMERGENCY STOP (master switch) immediately, decelerate truck with the
service brake and pull the parking brake.
Determine the cause of the malfunction and inform the supplier`s service, if neces-
sary.
Safety switch, driver`s seat
A
If the driver's seat is free or if the driver's weight is set too high, the driving function is
interrupted by the safety switch (see chapter E, section “"Adjusting the driver's
weight”").
f
Do not drive the truck unless the hoods
are closed and locked in the stipulated
manner.
The lanes and routes must be free from
any obstacles.
The driving speed must be adapted to
the load and the prevailing local condi-
tions of the routes, lanes and working ar-
eas!
–– Lift fork carrier approx. 200 mm so that
the fork tines are lifted above the
ground.
–– Incline hoist frame backward.
m
Depending on the truck version,
the driving direction switch can be loca-
ted
at the Solo Pilot (t, 18) or
at the Multi Pilot (o, 52).
18
V
R
52
E 17