Jungheinrich EFG-DH ac 10 Betriebsanleitung Seite 55

Additional Control I
(Integrated side shifting device)
–– Press key (60) on the Multi Pilot to
push fork carrier to the left.
–– Press key (61) on the Multi Pilot to
push fork carrier to the right.
Additional control II
A
The Multi Pilot can be turned for the op-
eration of a hydraulic attachment. When
operating attachments the operating in-
structions of the respective suppliers
have to be observed.
f
Observe load capacity of the attach-
ment.
Additional control III
To control auxiliary controller II instead
of auxiliary controller III, turn the Multi Pi-
lot and at the same time press push button (62).
E 24
60 61
62