Warning Indicators, Push Buttons, And Switches - Jungheinrich EFG-DH ac 10 Betriebsanleitung

4.1

Warning indicators, push buttons, and switches

Indicate or control the following:
Item Display / function
Push button to toggle between operating hours and time
–– Truck operating hours counted while key switch was set to “"ON”"
32
–– “"Eff”" operating hours can be switched “"ON”" or “"OFF”" with a code
–– Time display
Controller over temperature
33 –– Lights up in case of controller over temperature
–– Power is continuously reduced in relation to temperature
Pump motor, power steering motor over temperature
34 –– Pump motor, power steering motor temperature is continuously monitored
–– Power is reduced in case of over temperature
Drive motor over temperature
35 –– Drive motor temperature is monitored
–– Power is reduced in case of over temperature
Seat switch
36 –– Seat switch not closed
–– Truck ready for operation, seat not occupied
Parking brake applied
37
–– Truck ready for operation, parking brake applied
Travel direction indicator o
38
–– In case of lighting system with flashing system
Truck is in operation
39
–– Key switch to “"ON”"
Service display / UVV display
40
–– Service interval set has elapsed (1000 operating hours)
or annual UVV inspection is due (display flashes)
Brake fluid level too low
41
–– A sensor on the brake fluid reservoir monitors the brake fluid level
WARNING
42 –– Lights up in case of errors
–– Flashes when battery capacity is less than 10 %
Inching speed push button
43
–– Maximum travel speed km/h (adjustable)
Program selector button
44
–– Push button for “"Up”" and “"Down”"
SET button
45
–– Selects special functions
Operating program indicator
46
–– Indicates the drive program selected (1 to 5)
E 9