Jungheinrich EFG-DH ac 10 Betriebsanleitung Seite 49

Forward motion (single-pedal t)
f
Make sure that the driving area is free
from obstacles.
–– Release parking brake (10).
–– Push direction switch (52) at the Multi
pilot (o) or at the Solo pilot (18) in for-
ward direction.
–– Slowly actuate driving pedal (9).
Forward motion (dual-pedal o)
f
Make sure that the driving area is free
from obstacles.
–– Release parking brake (10).
–– Slowly actuate right driving pedal (17).
f
Do not move Multi Pilot for driving.
Changing the drive direction (single-pedal t)
f
Before starting to drive in opposite direction you have to make sure, that the rear driv-
ing area is free from obstacles.
–– Release foot from accelerator pedal (9).
–– Decelerate truck with the brake pedal (8) until standstill.
–– Set driving direction switch (52) or (18) via the neutral position to the desired direc-
tion.
–– Carefully press accelerator pedal until the desired speed is reached.
Changing the drive direction (dual-pedal o)
f
Before starting to drive in opposite direction you have to make sure, that the rear driv-
ing area is free from obstacles.
–– Release foot from the actuated driving pedal (17).
–– Decelerate truck with the brake pedal (16) until standstill.
–– Slowly actuate driving pedal (15), until the desired driving speed has been reached.
E 18
R
10
7
15
16
17
52
V
8
9