Safety Belt Maintenance - Jungheinrich EFG-DH ac 10 Betriebsanleitung

6.9

Safety belt maintenance

Daily inspections of the condition and operatability of the safety belt should be carried
out by the driver before using the industrial truck. A malfunction can only be detected
at an early stage by regular inspection.
–– Pull belt out completely and check on unravelling
–– Check operatability of belt lock and faultless drawing in of the belt into the winder
–– Check cover on damages
Automatic blocking system test:
–– Park industrial truck horizontally
–– Pull out belt jerky
m
The automatic system must block the belt.
–– Open hood by approx. 30 degree
m
The automatic system must block the belt
f
Do not operate industrial truck with defective safety belt but have it replaced immedi-
ately!
F 12