Safety Belt - Jungheinrich EFG-DH ac 10 Betriebsanleitung

5.5

Safety belt

f
Fasten safety belt before using the industrial truck.
The belt protects you from serious injuries!
Protect safety belt from dirt (e.g. cover during standstill) and clean it in regular inter-
vals. Thaw out and dry frozen belt lock or belt winder to prevent them from freezing
up again.
A
The dry temperature of the warm air must not exceed +60°!
f
Do not change anything at the safety belt!
Increased danger because of malfunctions.
–– Replace safety belts after each accident.
–– Only original spare parts must be used for retrofitting and repairs.
f
Damaged or inoperative safety belts must be replaced by appointed retailers or
branches.
Behaviour in exceptional situations
f
Never loose the belt and never alight if
the industrial truck threatens to overturn.
Jumping down increases the danger of
injuries!
Proper behaviour:
–– Bend trunk over the steering wheel.
–– Hold steering wheel tight with both
hands and support with feet.
–– Bend body against the falling direc-
tion.
E 13