Jungheinrich EFG-DH ac 10 Betriebsanleitung Seite 50

Backward motion (single-pedal t)
f
Make sure that the rear driving area is free from obstacles.
–– Switch driving direction switch (52) on
the Multi Pilot (o) or at the Solo pilot
(t, 18) backward (R).
–– Slowly press accelerator pedal (9) un-
til the desired speed is reached.
Backward motion (dual-pedal o)
f
Make sure that the rear driving area is
free from obstacles.
–– Slowly actuate left driving pedal (15)
until the desired driving speed has
been reached.
f
Do not move Multi Pilot for driving.
Accelerating the truck
(single-pedal t)
–– Slowly press accelerator pedal (9) un-
til the truck starts to move.
–– Press accelerator pedal (9) further
down.
Engine speed and riding speed increase in relation to the actuation travel.
Accelerating the truck (dual-pedal o)
–– Slowly actuate driving pedal (15 or 17) depending on selected driving direction, un-
til the vehicle starts moving.
–– Press down driving pedal (15/17) further. Motor speed and driving velocity increase
in relation to the actuation.
R
10
7
15
16
17
52
V
8
9
E 19