Top Up Brake Fluid; Changing Of Hydraulic Oil Filter - Jungheinrich EFG-DH ac 10 Betriebsanleitung

6.7

Top up brake fluid

A
An insufficient brake fluid level is indicat-
ed on the display.
f
Brake fluid is poisonous and must only
be stored in closed original containers.
–– Park the truck and render it safe (see
chapter E).
–– Unscrew the fastening screws and re-
move the floor plate with the floor mat
(1).
–– Take off the cap (8).
–– Top up brake fluid (see section 5.1).
A
The brake fluid level must be visible be-
tween the marks “"Min.”" and “"Max.”".
m
Changed consumption type materials
must be disposed of in accordance with
the applicable environmental protection
regulations.
6.8

Changing of hydraulic oil filter

The hydraulic oil filter is located at the
front left next to the tilt cylinder and is ac-
cessible once the floor plate has been
removed.
–– Unscrew the closing cap of the hy-
draulic filter (7).
–– Change filter cartridge; if the O-ring is
damaged, it must also be changed.
Lubricate O-ring slightly when install-
ing the filter.
–– Screw in closing cap again.
8
1
7
F 11