InterCo SIMPLY LIGHT Bedienungsanleitung Seite 39

In order to load the folded SIMPLY LIGHT,
grasp the crossbar at the back (Photo 14)
as well as the connecting tube in the front
(Photo 15) in the middle and lift the under-
carriage�
Attention: Do not use the folded push bar to
lift the undercarriage !!!
6.6.2 Unfolding SIMPLY LIGHT
When unfolding SIMPLY LIGHT, proceed as
follows:
First of all, check that the SIMPLY

LIGHT parking brakes are released�
Lift SIMPLY LIGHT at the rear�

Take hold of the spokes of one rear

wheel and press the button located on
the axle with your thumb�
Hold the button pressed and insert the axle into the axle mounting on the

frame�
Let go of the button and check whether the wheel is fastened securely� It

should not be possible to pull it off!
Important: During this check, the button must not be pressed�
Repeat this operation for the other rear wheel�

Depending on the version, attach the swivel wheels as described in section

6�9�4�
If necessary, turn the anti-tip wheels as described in section 6�7�

Fold the handle unit back until it engages audibly�

Next, fasten the loose upper part of the handle in position as described in

section 5�1�
Adjust the desired height of the handle; first lift the handle to the desired

height�
Fasten into position by tightening the quick release connectors as de-

scribed in section 5�2�
If clamping is insufficient (the handle can still be moved) proceed as de-

scribed in section 5�2�
Attach the seat unit (see section 6�1)�

14
15
OPERATION AND ASSEMBLY
39