Herunterladen Inhalt Inhalt Diese Seite drucken

A Ttachment And Adjustment Of The Footrest; A Ttachment And Adjustment Of The Footplate - InterCo SIMPLY LIGHT Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für SIMPLY LIGHT:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

fixation by pushing down the lever (Photo 10)�
Now you can pull the seat shell out towards
the front (Photo 11)�
To remove the seat shell pull the locking
pin downward and turn by 90°� This way the
locking pin will remain in its unlocked posi-
tion� Open the seat shell fixation by pushing
down the lever� Now you can pull the seat
shell out towards the front� Remove the seat
shell from the undercarriage� Turn the lock-
ing pin until it locks audibly�
6.2
A ttachment and adjustment
of the footrest
To attach the footrest, proceed as follows:
Loosen the two wing screws on the
lower right and left sides of the front
(long) side of the trapezoidal adaptor
plate�
Slide in the footrest to the desired
depth�
Tighten the two wing screws�
6.3
A ttachment and adjustment
of the footplate
Prerequisite: The footrest has to be installed�
To attach the footplate, please proceed as
follows:
Loosen both wing screws on the right
and left sides of the front (long) side of
the trapezoidal adaptor plate�
Loosen both wing screws on the rear
edge of the footplate� Ensure that the thread of the wing screws does not
protrude onto the guides�
Slide the footplate onto the ends of the footrest and fasten at the desired
height with the wing screws�
Fasten footrests with the wing screws at the trapezoidal adaptor plate to
the required depth�
8
9
10
11
OPERATION AND ASSEMBLY
35

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis