B) Inserting The Vertical Tail - Reely SKY YAK54 Bedienungsanleitung

b) Inserting the Vertical Tail

Insert the vertical tail (1) into the prepared slot in the end of
the fuselage (2) according to the same principle as the
elevator unit.
Make sure that the bridge between the two elevators (3)
has sufficient space in the vertical tail recess. The elevator
must be able to deflect upwards and downwards without
dragging.
The vertical tail (1) and the elevator unit (4) also have to be
at a 90° angle to each other.
Figure 7
46