Connecting Water To The Appliance; Attaching The Base Strip - Gaggenau Rc 462 Montageanleitung

15. Connecting water to the appliance

Supplied, is a flexible hose for a domestic mains
connection ¾". Care should be taken than the supplied
sealing elements are mounted on the appliance and the
shut off valve!
!
Warning!
Do not kink the hosepipe when bending, otherwise there
is the risk of water damage and leakage.
1.
2.
3.
Remove the plugs from the appliance connection (1).
D
Lay the water hose such that it ends at the appliance
D
connection (2).
Slide the union nut and the sealing element onto the
D
water hose.
Attach the water hose to the appliance connection
D
and screw on the union nut (3). Screw tightly, using
manual force.
Screw the union nut tightly using the fixed spanner.
D
Do not over tighten!
Turn the shut off valve and the main water tap.
D
Re examine the point of connection at the shut off
valve and the appliance connection for leaks.

16. Attaching the base strip

!
Warning!
From the floor upwards, the maximum height of the base
strip is 10.1 cm. Never cover the ventilation cracks in the
base panelling. Risk of damage to the appliance.
Where necessary, cut the base strip to the required
D
length.
Attach base panelling to the appliance.
D
Take the protective film off from the adhesive pads on
D
the Velcro strip.
Put the base strip onto the base panelling and push
D
firmly.
69