Electrical Connection - Gaggenau RC 462 Montageanleitung

The subsurface must be level and even in order to ensure
that the appliance is securely installed and works
correctly.
The subsurface must be made from a hard, non flexible
material.
The floor of the installation space must have the same
height as the rest of the space.
On account of the weight of a fully laden appliance, it is
necessary to have a bearing subsurface. In the case of
doubt, the help of architect or specialist builder should
be enlisted.

Electrical Connection

Do not use an extension lead or a multi plug socket.
Connecting this appliance, only use a plug which has
been installed securely.
The plug to secure the appliance must be freely
accessible. Connect the appliance to a 220-240 V/50 Hz
ac current via a plug which has been properly installed.
The socket must be fused with a 10 to 16 A fuse.
For appliances operated in non European countries,
the identification plate should be checked whether
the electric supply and the current model stated
match the vales of the mains supply. For details
regarding the position of the identification plate, see
section Calling Customer Service / Identification
Plate". Any necessary exchanging of the mains lead
should carried out by a specialist electrician.
!
Warning!
On no account should the appliance be connected
to electric saving plugs or to converters which
convert dc current to 230 V ac e.g. solar appliances,
marine current mains networks.
47