Mounting Instructions; Checking The Installation Niche; Transporting The Appliance - Gaggenau RC 462 Montageanleitung

Mounting Instructions

!
Caution!
The following mounting instructions describe mounting
steps for various appliance models.
Therefore, deviations may occur from that shown in the
diagrams.
Reference is made to specific mounting steps for
individual appliances.
1.

Checking the installation niche

!
Warning!
In order to guarantee secure, trouble free installation and
an optimal overall impression of the adjacent cabinet
frontage careful care should be taken in ensuring that the
installation niche corresponds to the installation
requirements.
Before starting with the installation, check that the
installation niche corresponds to all of the requirement for
a secure and trouble free installation.
Check the subsurface.
D
Follow the notes in the section Installation location".
Check the dimensions of the niche.
D
Re examine whether the niche has right angles.
D
Re examine the positioning of the plug.
D
Additionally follow the instructions in the sections
Electrical Connection" and Dimensions of the
Installation Niche".
Re examine the positioning of the water connection
D
(for appliances with ice maker).
Additionally follow the instructions in the sections
Water Connection" and Dimensions of the
Installation Niche".
Re examine the stability and fastening of the
D
neighbouring cabinet parts. All cabinet parts in the
vicinity of the appliance have to be firmly connected
to the wall.
Re examine that when opening the appliance door,
D
it does not collide with neighbouring kitchen parts.
(for door opening angle, see DESIGN GUIDE)
58
2.

Transporting the appliance

!
Caution!
The appliance is very heavy. Handle it carefully, as
otherwise people helping to lift it could be hurt or the
appliance could be damaged.
Transport the appliance with an aid to transport which is
suitable (sack barrow, trolley or wheelbarrow).
When transporting, secure the appliance from being
tipped.
When transporting, secure the appliance from being
tipped. The appliance has a height of 2134 mm. If it is not
possible to support the appliance in a vertical position
because of the structure of the building, the appliance
can be transported on its side.
When putting the appliance up, pay attention to the
minimum height that is required at the assembly location
according to the following table:
Width of Putting the
appliance appliance up
via its rear side
45.7 cm / 18"
61.0 cm / 24"
218.5 cm 218 5 cm
76.2 cm / 30"
91.4 cm / 36"
Never put the
appliance up appliance up
via its side! via its side!