8.
Preparing the water connection
(only for appliances which require a water
connection)
!
Warning!
Turn off the main water tap in order to avoid damage
from escaping water.
Lay the connection pipe. Always keep to the given
D
installed area in order to avoid damaging the
connection pipe when sliding the appliance in later.
Fix the connection pipe to the floor with adhesive
D
tape.
9.
Attaching the edge protectors
In order to protect the edges of the installation niche,
D
attach the supplied protection ribs with adhesive
tape.
10. Setting up side by side
If a side by side set up of two appliances is envisaged,
connect the two appliances to one another now. Further
information concerning the side by side set up can be
found in the mounting instructions of the sealing kit.
65