Installation Possibilities; Stand Alone Appliance; Side By Side; Stand Alone Appliance With Dividing Wall - Gaggenau RC 462 Montageanleitung

Installation Possibilities

There are various set up options.
These are only limited by the kitchen design and the
finger protection function.

Stand alone appliance

Side by side

* it is necessary to have a dividing wall!
If two appliances are set up next to each other, a sealing
kit for side by side combination should be used in order
to guarantee a stable connection.
Further information concerning this can be found in the
section Additional accessories" on page 57.
Stand alone appliance with
dividing wall
1.
3.
Note:
- When measuring the dividing wall for model 4,
pay attention to the thickness of the furniture front to
be mounted in order to avoid damage when opening
doors at the same time.
- If the distance between the appliances is less than
160 mm, the heating kit for the side by side
combination should be used.
Further information concerning this can be found in
the section Additional accessories" on page 57.
- The minimum thickness of the dividing walls
is 16 mm.
As an end section to a row
of kitchen units
If a side of the appliance is visible, use a side covering.
The side covering must be connected firmly to the wall,
the floor and the upper cupboards before the appliance is
slid into the installation niche.
The dimensions of the side covering are governed by the
opposing niche wall. During installation, make sure that
the installation niche has right angles and has the exact
size necessary for the appliance.
2.
4.
45