Tools And Accessories Which; Are Needed; Scope Of Delivery; Additional Accessories - Gaggenau RC 462 Montageanleitung

Tools and Accessories which

are needed

Scope of delivery

- Mounting instructions
- Operating instructions
- Installation accessories
Additional accessories3.
Installation accessories for side by side installation
For permanent connection of two appliances, e.g.
a freezer next to a refrigerator.
Lateral additional heating
Necessary when the distance between two appliances
is less than 160 mm.
Finger protection, axtra long
Connecting unit for furniture doors
For connecting two furniture doors (see explanation on
page 71). It can be used for standard height furniture
doors without any preparation work.

Tools

- T20 rechargeable screwdriver
- T20 Torx screwdriver
- T20 Torx bit + magnetic holder
- 8 mm socket wrench
- Various size drills
- Fixed spanner SW 13 mm
- Adjustable spanner
- Knife with an adjustable blade
- Metal tape measure
- Angle of contact
- 60 cm and 120 cm spirit levels
- Straight edge
for stand alone appliances min. 120 cm long
for setting up two appliances side by side
min 200 cm long

Miscellaneous

- Step ladder
- Trolley, wheelbarrow or sack barrow
- Hammer drill for drilling holes into the wall and floor
- Various size drills for various materials
- Wood plank, (min. 8 x 10 cm) as an alternative
anti tip device. Length should correspond to the
width of the installation niche
- Various size wood screws
- Thin (1.5 mm), suitable material to protect the floor
against damage (e.g. linoleum)
- Suitable material for covering and protecting the
cabinets (e.g. protective film)
- Adhesive tape
57