Gaggenau RC 462 Montageanleitung Seite 63

Subsurface wooden floors
The wood screws (5 x 60 mm and 4 x 15 mm) which are
supplied should be used for wooden floors.
Drilling guide holes:
D
3 mm for the wood screws (5 x 60 mm)
2 mm for the wood screws (4 x 15 mm)
Ensure that the screws 5 x 60 at least take a hold
(19 mm) in the solid subsurface.
Tightly screw the anti tilt ribs.
D
Re examine to make sure that the screws are firmly
tightened!
Subsurface concrete
!
Warning!
When installing or working with floor anchors, always
wear protective glasses or other protective equipment /
clothing. Risk of injury!
Floor anchors are not suitable for use in connection with
lightweight construction masonry, breeze blocks or tiles.
Never use floor anchors in fresh concrete which has not
hardened.
In drilling holes for these floor anchors, do not use
core drills.
Use a floor anchor M8 and a screw M8. In addition, use
the wood screws supplied (5 x 60 mm and 4 x 15 mm).
Drill a hole with a 10 mm diameter having a depth
D
a little more than the raising depth.
Use the drill supplied.
Clean the hole or drill a little deeper.
D
By hand, screw into the dowel until you can feel
D
resistance.
Strike the dowel and screw into the hole until the
D
head of the screw has a 13 mm distance to the
anti tilt securing device.
Screw tightly.
D
Additionally use the supplied wood screws
D
(if the subsurface allows).
63