Note:
We recommend mounting the covering frames before
aligning the ice and water dispenser.
For furniture doors with a 19 mm thickness:
Slide the covering frame onto the ice and water
D
dispenser and press in until the frame is flush with
the door surface.
For furniture doors with a 38 mm thickness:
Press lengthening frame onto the covering frame.
D
Slide the covering frame onto the ice and water
D
dispenser and press in until the frame is flush with
the door surface.
Note:
In the case of appliances with a high grade steel door,
there is a special covering frame
Loosen the screws on the 4 clips.
D
Place a slit screwdriver into one of the 4 slits and shift
D
the blocks laterally such that the ice and water
dispenser has an equal distance to the furniture door.
Retighten the screws on the clips.
D
Apply the covering.
D
Insert the rack
D
79