Selecting The Device Address - Siemens CKA4820 V2 Benutzerhandbuch

Key Operating
sequence / mode
Joystick SISTORE AX
Direct mode
Direct mode
Direct mode
ZOOM In key
Telemetry mode
Direct mode
ZOOM Out
key
Telemetry mode
Direct mode
Focus infinity
key
Telemetry mode
Direct mode
Focus 0 key
Telemetry mode
Direct mode

15.3.1 Selecting the device address

Siemens Building Technologies
Fire Safety & Security Products
Description Function
Acknowledges the
Alarm alarm, displays the
alarm logbook
Confirms an entry during
ENTER key
configuration
Rewinds video
Rewind sequences at high
speed
Zooms in the lens of the
Zoom in
camera being controlled
Previous image single image backward
Zooms out the lens of
Zoom out the camera being
controlled
Next image single image forward
Focuses the lens of the
Focus infinity camera being controlled
to infinity
Fast-forwards video
Forward
sequences
Focuses the lens of the
Focus near camera being controlled
to short-distance
Stops playing
Stop
sequences
The corresponding symbols (e.g. for SISTORE AX) are also printed on the film
strip (scope of supply) which can be inserted above the F keys.
If several SISTORE AX are connected to the same bus you can select the device
addresses using the following key combination:
Key sequence
Press
SISTORE
AX4
Description
Selection of SISTORE AX (here no. 5)
1. Keep AX key depressed.
2. Press desired AX number key (1–9) (here no. 5).
The new AX address is now saved in the control unit and it also
appears on the display.
SISTORE AX configuration
SISTORE SISTORE
SISTORE
AX9/AX16 AX9/AX16
AX4 Lite Model Model
250/50 250/200
69
03.2009