Key Assignment - Siemens CKA4820 V2 Benutzerhandbuch

Configuring IVM Terminal Client
13.2

Key assignment

60
Siemens Building Technologies
Fire Safety & Security Products
In operating mode Control unit connected to IVM Terminal Client SIMATRIX
RS232 interface, the keys F1 to F10 are assigned in the IVM Terminal Client.
To select the telemetry devices and monitors, enter the key sequence as shown in
the following table. You must start again if you do not press the next key within
three seconds. Example:
Key sequence Description
Select dome/camera 5 on monitor 1
03.2009