11
Configuration of SIMATRIX
11.1
SIMATRIX TTY connection (Term.x)
Siemens Building Technologies
Fire Safety & Security Products
Prerequisites:
SIMATRIX is connected to the control unit interface COM1B. See Section 8.2.1:
–
Connecting SIMATRIX to Term.x socket.
The control unit has been put into service. See Section 9.1: Control unit setup.
–
The SIMATRIX parameterization software is required to incorporate the control
–
unit into the SIMATRIX video matrix system. The latest version of the SIMATRIX
parameterization software can be found in the Intranet.
Fig. 31
Control unit connected to SMATRIX terminal/TTY connection (Term.x)
1.
Connect the telemetry devices to the TTY interface of the video matrix.
See Fig. 31.
The video matrix regularly scans the control unit to see whether a key has
been pressed.
As a reply, the control unit sends the corresponding code of the key.
Configuration of SIMATRIX
03.2009
49