Siemens CKA4820 V2 Benutzerhandbuch Seite 162

Configuring telemetry devices
74
Siemens Building Technologies
Fire Safety & Security Products
Keys
Keep pressed
Keep pressed
Keep pressed
Keep pressed
Keep pressed
Keep pressed
When selecting position sequence parameters you always have to make a numeric input as well;
proceed in the following manner:
Press and hold CAM key while making numeric input, keep CAM key pressed and select the
appropriate function key F8 to F10.
Selecting position sequence parameters
When selecting position sequence parameters you always have to make a numeric
input as well; proceed in the following manner:
1. Press and hold Cam key while making numeric input.
2. Keep Cam key pressed and select the appropriate function key F8 to F10.
Keys
press
press
press
Keep pressed
SCU protocol TTY
B&W mode on
Mechanic control
Electronic control
Sequence, 1st position *
,
Sequence, last position *
,
Sequence, dwell time *
Switch relay 3 on
Switch relay 3 off
Iris open
Iris closed
OSD menu: navigate upwards
OSD menu: navigate downwards
OSD menu: accept settings
Open OSD menu (administrator only)
SIVIS protocol (RS485)
Selection of PTZ/dome/camera 2
Save position 2 of dome/camera
Call saved position 2 of dome/camera
PATROL start
03.2009