12
Configuring a SIEMENS Multiplexer CSXC1601
Siemens Building Technologies
Fire Safety & Security Products
Prerequisites:
The multiplexer is connected to the control unit interface COM1A. See Section
–
8.3: Connecting a SIEMENS Multiplexer CSXC1601.
The control unit has been put into service. See Section 9.1: Control unit setup.
–
Fig. 33
Multiplexer directly connected to control unit
No data are sent via the telemetry interface.
Configuring a SIEMENS Multiplexer CSXC1601
55
03.2009