Siemens CKA4820 V2 Benutzerhandbuch Seite 126

Connection possibilities to the control unit
38
Siemens Building Technologies
Fire Safety & Security Products
Settings on the control unit
1. Make DIP switch settings on the control unit as shown in Fig. 26.
Fig. 26 DIP switch settings on the control unit
2. Configure the telemetry interface COM2.
Pin No. Signal (description)
1 TTY+
2 TTY-
For more information on configuration, see Section 18: Configuring pan-and-tilt
drive CDD2410.
03.2009