Safety Devices; Emergency Stop Mushroom Button - Optimum OPTImill MH 25 SV Betriebsanleitung

OPTIMUM
M A S C H I N E N - G E R M A N Y
Make sure that the dust and mist generated that is hazardous to health are safely
vacuumed at their point of origin and extracted from the working area or filtered. To
accomplish this, use a suitable extraction unit.
CAUTION!
Risk of fire and explosion by using flammable materials or cooling lubricants.
Before processing inflammable materials (e.g. aluminium, magnesium) or using inflammable
auxiliary materials (e.g. chemical spirits) it is necessary to take additional preventive measures
in order to safely avoid health risks.
1.9

Safety devices

Use the milling machine only with properly functioning safety devices.
If there is a failure on the safety device or if it is not functioning for any reason, stop the milling
machine immediately.
It is your responsibility!
If a safety device has been deactivated or is defective, the milling machine can only be used
again if you
eliminate the cause of the defect,

have verified that there is no danger that could result for people or property.

WARNING!
If you bypass, remove or deactivate a safety device in any other way, you are
endangering yourself and other personnel working with the milling machine. The
possible consequences include:

Injuries due to components or workpieces flying off at high speed,

contact with rotating parts,

fatal electrocution.
WARNING!
The separation guard made available and delivered together with the machine is designed to
reduce the risk of workpieces or scraps from the tools or workpieces being expelled, but not to
remove them completely. Always work carefully and observe the limits of your machining proc-
ess.

1.9.1 Emergency stop mushroom button

CAUTION!
The spindle continues to rotate for a
while depending
moment of inertia of the spindle and
the tool.
The emergency stop mushroom button
brings the machine to a standstill.
Turn the knob to the right to unlock and
release the emergency stop mushroom
button.
GB MH25SV
Page 60
on the mass
Emergency stop
Mushroom Switch
Original operating instructions
Img.1-1: Emergency stop mushroom button
Version 1.0.1 dated 2015-12-17