Inhaltsverzeichnis
Werbung
Ensure that the harmful dust and mist generated are safely sucked off at the point of
origin and routed away from the working area or filtered. To do so, use a suitable
extraction unit.
CAUTION!
Risk of fire and explosion by using flammable materials or cooling lubricants.
Extra precautionary measures must be taken before machining flammable materials (e.g. alu-
minium, magnesium) or using combustible agents (e.g. spirit) to avert a health hazard.
1.9
Safety devices
Use the drilling- milling machine only with properly functioning safety devices.
Stop the drilling- milling machine immediately, if a safety device fails or is faulty or becomes
ineffective.
It is your responsibility!
If a safety device has been activated or has failed, the drilling- milling machine must only be
used if you
the cause of the fault has been eliminated,
have verified that there is no danger to personnel or objects.
WARNING!
If you bypass, remove or deactivate a safety device in any other way, you are
endangering yourself and other personnel working with the drilling- milling machine.
The possible consequences are:
injuries due to components or workpieces flying off at high speed,
contact with rotating parts and
fatal electrocution.
The drilling- milling machine features the following safety devices:
An emergency switching off push button,
a protective cover on the drilling / milling head.
WARNING!
Although the isolating safety devices provided and delivered with the machine are
designed to reduce the risks of workpieces being ejected or parts of tools or workpieces
breaking off, they cannot eliminate these risks completely. Always work carefully and
observe the limits of the machining process.
1.9.1
Emergency switching off push button
The emergency switching off push but-
ton switches off the drilling-milling
machine.
Version 1.0.1 - 2021-11-18
Emergency
switching off
push button
Img.1-2:
Translation of original instruction
Emergency switching off push button
MB4
EN
55
Werbung
Inhaltsverzeichnis
