Safety Measures During Operation; Safety Devices; Emergency Stop Switch - Optimum OPTidrill DH 40CT Betriebsanleitung

INFORMATION
The mains plug of the drilling milling machine must be freely accessible.
1.8

Safety measures during operation

CAUTION!
Danger due to inhaling dust and mist that is hazardous to health.
Dependent on the material which need to be processed and the used auxiliaries dusts
and mist may be caused which might impair you health.
Ensure that the harmful dust and mist generated are safely sucked off at the point of
origin and routed away from the working area or filtered. To do so, use a suitable
extraction unit.
CAUTION!
Risk of fire and explosion by using flammable materials or cooling lubricants.
Before processing inflammable materials (e.g. aluminium, magnesium) or using
inflammable auxiliary materials (e.g. spirit) it is necessary to take additional preventive
measures in order to safely avoid health risks.
1.9

Safety devices

Use the drilling milling machine only with properly functioning safety devices.
Stop the drilling milling machine immediately, if a safety device fails or is faulty or becomes inef-
fective.
It is your responsibility!
If a safety device has been activated or has failed, the drilling milling machine must only be
used if you

the cause of the fault has been eliminated,

you have verified that there is no danger to personnel or objects.
WARNING!
If you bypass, remove or deactivate a safety device in any other way, you are
endangering yourself and other personnel working with the drilling milling machine. The
possible consequences are:

injuries due to components or workpieces flying off at high speed,

contact with rotating parts and

fatal electrocution.
WARNING!
Although the isolating safety devices provided and delivered with the machine are designed to
reduce the risks of workpieces being ejected or parts of tools or workpieces breaking off, they
cannot eliminate these risks completely.
The drilling and milling machine machine features the following safety devices:

an emergency stop push button.

a lockable main switch.

a drilling table, milling table with T-slots to fix the workpiece or a vice.

an adjustable spindle guard with position switch.
1.9.1

Emergency stop switch

The drilling and milling machine is equipped with an emergency stop switch.
Safety
Version 1.0.1 - 2021-07-06 Translation of original instruction
DH 40CT EN
61