Operating Material; Emissions - Optimum OPTImill MH 25 SV Betriebsanleitung

Temperature
2.10

Operating material

Bare steel parts
2.11

Emissions

Maximum sound pressure level at 1 m distance from
the machine and 1.60 m above the ground.
CAUTION!
The machine operator should use hearing protection.
INFORMATION
This numerical value was measured on a new machine under the operating conditions specified
by the manufacturer. The noise behaviour of the machine might change depending on the age
and wear of the machine. Furthermore, the noise emission also depends on production engi-
neering factors, e.g. speed, material and clamping conditions.
Version 1.0.1 dated 2015-12-17
Humidity
Original operating instructions
OPTIMUM
M A S C H I N E N - G E R M A N Y
5-35 °C
25 - 80%
Mobilgrease OGL 007 or,
Mobilux EP 004, acid-free oil, e.g. weapon oil, motor oil
79 dB(A) in idle running
MH25SV GB
Page 67