Drill-Mill Head; Cross Table; Dimensions; Working Area - Optimum Optimill Mh 25 Sv Betriebsanleitung

OPTIMUM
M A S C H I N E N - G E R M A N Y
2.4

Drill-mill head

+Z
Travel of Z axis [mm]
Throat [mm]
max. torque drive Z-axis
maximum movement speed Z-axis [ m/min ]
minimum movement speed Z-axis [ m/min ]
Scale on the Z-axis hand crank
2.5

Cross table

Table length [mm]
Table width [mm]
max. Load on cross table
T - slot size / distance / number
Travel of X axis [mm]
max. torque drive X-axis
maximum movement speed of X axis [ m/min ]
minimum movement speed of X axis [ m/min ]
Scale on the X axis hand crank
Travel of Y axis [mm]
maximum movement speed of Y axis [ m/min ]
minimum movement speed of Y axis [ m/min ]
max. torque drive Y-axis
Scale on the Y-axis hand crank
2.6

Dimensions

Total weight [kg]
2.7

Working area

2.8

Speeds

Rotation speed electronically adjustable [ min
2.9

Environmental conditions

GB MH25SV
Page 66
+Y
+X
-1
]
Original operating instructions
270
185
4.2 Nm
0.45
0.08
4mm/rev - graduation 0.02mm
620
180
30 kg
12 mm / 50 mm / 3
400
2.2 Nm
0.93
0.15
4mm/rev - graduation 0.02mm
210
0.58
0.1
2.2 Nm
4mm/rev - graduation 0.02mm

"Dimensions" on page 70
200
Keep a work area of at least one metre around the
machine free for operation and maintenance.
200 - 4000
Version 1.0.1 dated 2015-12-17