H) Activation Time For Outputs #1 And #2 - Sygonix 1559246 Bedienungsanleitung

h) Activation time for outputs #1 and #2

By default, outputs #1 and #2 are activated for 1 second when a valid user or visitor code is
entered.
This default setting is designed for use with door openers.
The activation duration can be set from 1 - 999 seconds (i.e. more than 16 minutes).
Each output can also be used in 'toggle' mode. This allows you to permanently enable and
then disable the corresponding output. Use this mode to control (arm/disarm) an alarm system.
In toggle mode, the output is activated until you disable it by entering a user code.
We recommend that you only use toggle mode in combination with an alarm system
or a fail-safe door opener.
Fail-safe door openers release the latch when the power is removed (non-standard
door opener type, used for emergency exit doors so that the door opens in the event
of a power cut).
Fail-secure door openers (releases the latch when power is supplied; used for house
doors) may overheat when the output is permanently enabled.
89