I) Security Features For Incorrect Codes - Sygonix 1559246 Bedienungsanleitung

i) Security features for incorrect codes

You can set the keypad to lock and trigger an alarm (via a connected alarm system) to prevent
intruders from gaining access after multiple guess attempts.
Proceed as follows:
• The combination lock must be in programming mode (see section 12. a) for details).
• Enter programming code
• Select the desired function.
.....
• Press the button to confirm your entry. The combination lock will beep twice and the mid-
dle LED will flash two times to indicate that the setting has been saved.
• The right-hand LED will turn red when the keypad is locked.
Example 1: Lock the keypad after 5 incorrect attempts
(a) (b) (c)
(a) Programming code for keypad lock
(b) Lock the keypad after 5 incorrect attempts
(c) Saves the setting (the lock will beep twice and the middle LED will flash two times)
94
.
After 10 incorrect entries (user codes), the keypad will be locked for 30
seconds (default setting).
After 10 incorrect entries (user codes), the "DU OUT" output will be ac-
tivated. This output can be used to trigger an alarm system. Entering a
correct user code (or the superuser code) resets the output.
After 5 to 10 incorrect entries (user codes), the keypad will be locked for
15 minutes. Entering the superuser code unlocks the keypad.
The security feature/keypad lock is disabled.