Beeps In Normal Mode - Sygonix 1559246 Bedienungsanleitung

l) Beeps in normal mode
In normal mode, the combination lock beeps when you press a button (e.g. when entering a user
code). It beeps five times when you enter an incorrect code.
These beeps are designed to confirm button presses (and indicate incorrect unlock
attempts).
You can disable these beeps to avoid being disturbed.
Proceed as follows:
• The combination lock must be in programming mode (see section 12 a for details).
• Enter programming code
• Select the desired function.
No beeps
Short beep when you press a button / 5 short beeps after an incorrect unlock attempt
(default setting)
• Press the button to confirm your entry. The combination lock will beep twice and the mid-
dle LED will flash two times to indicate that the setting has been saved.
In programming mode, the beeps are always enabled for security reasons.
98
.