Sygonix 1559246 Bedienungsanleitung Seite 109

Step 4: Create three different user codes for output #1
Enter the following key combination:
(a) (b)
(a) Output #1 should be activated
(b) Memory slot number = 00 (for output #1 choose from 00 - 99)
(c) User code = 1111
(d) Saves the code (the lock will beep twice and the middle LED will flash two times)
(a) (b)
(a) Output #1 should be activated
(b) Memory slot number = 01 (for output #1 choose from 00 - 99)
(c) User code = 2222
(d) Saves the code (the lock will beep twice and the middle LED will flash two times)
(a) (b)
(a) Output #1 should be activated
(b) Memory slot number = 02 (for output #1 choose from 00 - 99)
(c) User code = 3333
(d) Saves the code (the lock will beep twice and the middle LED will flash two times)
Step 5: Activate output #1 for 3 seconds
(a) (b) (c)
(a) Start programming for output #1
(b) Duration "3" = Activates the output for 3 seconds when a valid user code (or visitor code) is
entered
(c) Saves the setting (the lock will beep twice and the middle LED will flash two times)
(c) (d)
(c) (d)
(c) (d)
109