Symbols And Signage; Reference Standards; Description And Features; Technical Characteristics - Elite Rivo Anleitung

Do not select training modes that are either too extreme or
incompatible with the health, age and physical prowess of
the user.
Setting parameters must be overseen by an experienced and
responsible adult.
Even though the product simulates road-like conditions, make
sure your posture on the bicycle is proper and comfortable.
Should you experience any discomfort or pain while working
out, stop using the home trainer right away and consult your
physician.

SYMBOLS AND SIGNAGE

On the manual and/or in some cases on the product and/or
its packaging some symbols or panels are used to highlight
or indicated dangers, obligations, warnings or notes.
Symbol Description
General warning. It prohibits from conduc-
ting said operation or maneuver
EN
General danger: Dangerous operations or
52
situations, where the users or maintainers
must be extra careful.
Obligation to read: Instructions must
always be at hand and must not be dama-
ged in any way.
Notes: It indicates particularly sensitive ne-
cessary instructions.

REFERENCE STANDARDS

International standards and National laws respected in the
design and construction of the product, as well as safety and
environmental standards for use of the product.
Radio Equipment Directive (RED): Directive 2014/53/EU
RoHS Directive: Directive 2011/65/EU + Directive 2015/863
European Ecodesign Directive: Directive 2009/125/EC + EC
Regulation No. 278/2009
ETSI EN 301 489-1 V2.2.3 / ETSI EN 301 489-3 V2.3.2 /
ETSI EN 301 489-17 V3.2.4 / ETSI EN 300 328 V2.2.2
EN IEC 55014-1:2021
EN IEC 61000-3-2:2019 + A1:2021
EN 61000-3-3:2013 + A1:2019 + A2:2021 + A2/AC:2022
EN IEC 55014-2:2021
EN IEC 62311:2020
IEC 60335-1:2020
This device complies with Part 15 of the FCC Rules. Opera-
tion is subject to the following two conditions:
(1) This device must not cause harmful interference and
(2) This device must accept any interference received, inclu-
ding interference that could cause undesired operation.
This device has been tested and found to comply with the
limits for Class B digital devices, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential instal-
lation.

DESCRIPTION AND FEATURES

The Rivo with Cog and Click is an innovative roller, which
while maintaining the very high performance characteristics
of the Elite rollers, such as the broad braking torque range,
direct and precise measurement of the power developed by
the cyclist, extreme roundness of pedalling and compatibility
with open communication standards, adds a new feature: the
Zwift Cog and Click.
The Zwift Cog replaces the regular roller sprocket cassette
with a single sprocket device. Obviously, having only one
sprocket prevents the traditional mechanical gearbox shift,
which is replaced by a virtual ratio gearbox shift.
This solution has many advantages: it avoids the noise and
wear of the gearbox shift, and provides an immediate gear-
box shift even under maximum effort as well as being compa-
tible with 8 to 12 speed/gear ratio.
In addition, thanks to the Virtual gearbox there is no need to
have a double control, for front and rear derailleur, instead
a simple command is enough for a much easier sequential
gearbox (with 24 gear ratios).
To manage the virtual exchange, we have included the Zwift
Click. A small device with two buttons (one to increase the
gear ratio and the other to decrease it) that can be easily
applied in any position on the handlebar.

TECHNICAL CHARACTERISTICS:

Cog:
• 18-tooth single sprocket
Click:
• Communication: Bluetooth
• Power source: CR2032 battery
• Product size: 47 x 47 x 13 mm
• Weight: 51 grams
• Battery life: >100 hours

Power value accuracy

Power data sent by home trainer is the result of multiple
calculations. These calculations take into account pedalling
speed, hometrainer brake and other factors.
Elite calibrates every single home trainer in order to improve
accuracy and reduce any margin of error, though some factors
might change over time and thus decrease power accuracy.
Spindown is a hometrainer calibration procedure that evaluates
changes arising from prolonged use and compensates their
influence on the resistance generated by the hometrainer.
Procedure:
It's important to conduct the calibration when the hometrainer
has been working for at least 10 minutes.
®