Transmission Protocols; Bluetooth; Wi-Fi - Elite Rivo Anleitung

With sprocket cassette
The product, to be used in all its functions, requires to be inter-
faced with software on: a personal computer (Windows, Mac),
mobile device (iOS and Android) or with computer cycle with
Bluetooth or Wi-Fi technology.
The use of Bluetooth and Wi-Fi standards, allows for broad
compatibility with all programs and apps on the market and in
particular with the software Elite My E-Training (via Bluetooth),
available for Windows, Mac, iOS and Android PCs.
The software or app Elite My E-Training allows for a wide varie-
ty of training/test modes, and is therefore suitable for all types
of cyclists, from novice to professional.
The app is available on the App Store (iOS version) and Goo-
gle Play (Android version), while the Windows PC and Mac can
be found on the www.elite-it.com website.
Main functions are:
• Video training
• Personalized training programs
• Google maps training sessions
• Data saving, import and export
It is still possible to use a third party software that is compati-
EN
ble with the home trainer communication standards. There are
several commercially available programs / apps / devices that
58
can connect to the product.
Please follow the program / app / device instructions on how to
properly connect to the home trainer.
Before using any app and beginning the connection procedure,
check that the home trainer is powered up and is not in energy
saving mode.
The electronic board of the home trainer features LED lights
that indicated the home trainer status. Please check the rele-
vant paragraph for a more in-depth explanation.

Transmission protocols

The product uses different transmission protocols to interact and
send data to programs / apps / devices.
Check compatibility with one of these proto-
cols with the Manufacturer of the app / softwa-
re / device.

Bluetooth

"Fitness Machine – Indoor Bike Service" (FTMS): This service
allows for the compatible program / app / device to receive
the training data and vary the resistance of the roller. This
service makes a complete interaction with the roller possible.
"Speed&Cadence Service"*: This service allows for sending
the speed and pedal cadence data. This service does not
allow interaction with a program / app / devices.
Warning: If the program / app / device uses the
Speed&Cadence service to receive the speed, you must set
a wheel circumference value equal to the actual value of the
wheel divided by 12,3. Example: If the circumference of the
wheel is 2095 mm, then the value to be entered as circumfe-
rence is 2095 / 12,3 = 170 mm.
"Power Service": This service allows for sending of the po-
wer data that the cyclist is developing. This service does not
allow interaction with a program / app / device.
In most cases, smartphones and tablets already have Blue-
tooth connectivity and therefore do not need any additional
components to communicate with the product. It may be that
older peripherals are not compatible. Check with the manu-
facturer for Bluetooth compatibility.
The product features double-channel Blueto-
oth. When the home trainer is connected to a
device, it is possible to also connect it to a se-
cond Bluetooth device.

Wi-Fi

Introduction: the roller introduces a new Wi-Fi radio transmis-
sion protocol added to Bluetooth.
Through the Wi-Fi module, the roller added 2 new features:
- automatic update via Wi-Fi
- use of the Dircon protocol (TCP/IP) via Wi-Fi, for the
transmission and reception of data with the various training
programs
Wi-Fi Update: the roller can be connected to the network via
Wi-Fi.
To pair the roller with the network, you must run the guided
procedure on the My E-Training app: "settings menu - Wi-Fi
configuration."
The App will guide you through the setup process.
NOTE: The roller supports 2.4GHz frequency band, for data
transmission via Wi-Fi. Make sure the router supports this
frequency band.
The Password for accessing the modem's network must be
a maximum of 32 characters, if this limit is exceeded, a pas-
sword of suitable length must be reset on the router so that
the roller can connect.
Once connected to the network, the roller can update the
firmware automatically, periodically checking if new firmware
is available.
When Elite releases a new firmware, the reel will automatical-
ly connect to the Elite server and download the update, at this
stage the white LED will flash quickly.
It is also possible to disable automatic updating in the "set-
tings – Wi-Fi Configuration" menu.
Wi-Fi data transmission protocol
The roller allows you to connect to all software that supports
the Dircon protocol via Wi-Fi. Through this protocol, the trai-
ner will transmit the information and receive the commands
from the training program.
Wireless specs
Description
Transmission frequencies
Protocols
Open area transmission distance 10 m
Wi-Fi Transmission power
Bluetooth Transmission power
Data
2400 to 2483.5 MHz
Home trainer: Blueto-
oth 4.0, Wi-Fi
Click: Bluetooth 4.0
20 dB
Home trainer: 0 dB
Click: -6 dB