Total Distance; Easy Start" Function; Technical Specs; Name And List Of Components - Elite Rivo Anleitung

any increase in resistance to the pedalling
won't be felt.

Total Distance

Operating as an odometer, the roller will now be able to moni-
tor the total distance you travel when you pedal on the roller.
The count is visible on the My E-Training app and is active
both when you use the roller on the software and when you
use it in stand-alone mode.

"Easy Start" Function

The "Easy Start" function facilitates the resumption of the in-
terval when you stop pedalling for a short period of time and
you are in ERG mode.
With this function, the roller is able to automatically reset the
resistance value of the training after the cyclist has stopped
pedalling, offering the user a few seconds during the recovery
phase to recover his cadence before returning to the selected
resistance.

Technical specs

EN
Description
54
Installed product size
(no bicycle)
Power supply data
Weight (no bicycle)
Maximum load
The product has been designed for use by a single
cyclist or user.
Name and list of components (pic. 1)
Included components
Ref. Description
A Home trainer
B Freehub body Spacer
C Chainstay adapter
D Right quick release adapter 130-135mm
E Left quick release adapter 130-135mm
F Right Thru-axle adapter 142mm
G Left Thru-axle adapter 142mm
H Quick release
L Power adapter
Q Freehub body
R Freehub clamping nut
S Middle leg
T Side legs
U Leg bracket
V TCEI Screw M8x55
Ref. Description
Z
K
N
Components not included
Rif. Descrizione
M
O
P
* not included in the packaging
** pre-installed on the product
Data
• Use the product only for the intended purposes.
52 x 70 x 49 cm
• Before starting a workout, place the home trainer in an ap-
propriate environment, far from potentially dangerous objects
Input: 100-240 V
(furniture, tables, chairs...) in order to avoid any possible in-
50-60hz 0,6 A
voluntary or accidental contact with the objects themselves.
Output: 12 V 1,5 A
• Check the correct fixing of the bicycle on the roller and the
10 kg full functionality of the quick release or the through pin before
each workout. The bicycle must be positioned vertically and
110 kg
fixed stably on the supports provided as indicated in the in-
structions. If it is not properly and permanently fixed, do not
proceed with the training.
• The Manufacturer cannot be held liable for any injury cau-
sed by malfunctions of the bicycle components. Pay extra
care to the fastening and the tightening torque of all bicycle
compoennts, if you have any doubts have the bicycle che-
cked by a technician before fastening it to the home trainer.
Nr.
• If you experience any anomalous vibrations check and
1
tighten all screws or nuts on the product.
2
• The product has been designed and manufactured to en-
sure maximum safety for users and/or third parties but it's still
1
necessary to prevent people, children or animals from getting
1
close to the home trainer when being used as the moving
1
parts of the home trainer and bicycle might cause damages
1
or injuries should they come into contact.
• Avoid placing your fingers or any object inside the slots in
1
the product as the risk to damage the home trainer and /or
1
cause serious injuries to people is high.
1
• The home traine does not have an emergency brake,
** therefore based on speed its inertia might make it continue
rotating for some time.
**
• During intense and continuous use the structure around
1
the brake might reach high temperatures. Always wait for it
2
to cool down before moving or disassembling the product.
• Even though there are areas that might reach high tem-
1
peratures, protected as they may be, the home trainer must
5
not come into contact with flammable elements or liquids (ie.
Zwift COG
Zwift Click
Sleeve locking COG
Sprocket cassette
Sprocket cassette ejector
Thru-axle
Adatpers are smaller-sized components and
can easily be misplaced.If you move your
home trainer we suggest to remove them and
store them in your bag.

SAFETY WARNINGS

Nr.
1
1
1
N.
*
*
*