App / Device; 13_Name And List Of Components; 14_Assembling; 15_Install The Sprocket Cassette On The Direto Xr-T - Elite DIRETO XR-T Anleitung

EN
depends on the device / software / app being used only
ANT+ and is also compatible with Bluetooth Smart monitors
allowing connection with monitors by both protocols.
12_USING THE DIRETO XR-T WITH THE
SOFTWARE / APP / DEVICE
We suggest using the My E-Training software/app,
available on iOS, Android, Windows and Mac OS.
My E-Training is a complete system with several training
modes, including videos, configurable software, Google
Maps races, Internet competitions and much more.
It's possible to use third-party software that is compatible
with the hometrainer communications protocol/standards.
There are several software/apps/devices currently on the
market that can connect to the DIRETO XR-T.
Please refer to the instructions for the specific software/
app/device for a proper connection to the hometrainer.
Before beginning the connection procedure with any app,
make sure that the hometrainer is powered up and is not
on the energy saver mode. The supplied hometrainer
charger must be connected to a power source.
The hometrainer motherboard features LED lights
indicating the current hometrainer status. Please check the
"Status LED lights" paragraph for an in-depth description.

13_NAME AND LIST OF COMPONENTS

Your DIRETO XR-T hometrainer includes:
N.1 DIRETO XR-T body
N.2 Freehub body spacer
N.1 Chainstay adapter
N.1 Right rotating chainstay adapter L=130-135mm (D)
N.1 Left rotating chainstay adapter L=130-135mm
N.1 Right rotating chainstay adapter L=142mm
N.1 Left rotating chainstay adapter L=142mm
N.1 Quick Release
N.1 Riser block
N.1 Power supply
WARNING: adapters ref. C, D, E, F, G are small sized
components and might easily be misplaced or lost. If
you move the hometrainer it's advisable to remove the
adapters and store them in their bag as they might easily
slip out during transport.
Any spare parts are available in our online store or by
directly contacting Elite and/or your country's distributor.

14_ASSEMBLING

- Disassemble the DIRETO XR-T body (Ref. A)
- Place the DIRETO XR-T body (Ref. A) vertically and hold it
in place with the upper handle
- Spread the side legs to its max extent (Pic. 1)
34
- Tighten the safety knob (Pic. 2).
- Make sure the hometrainer is stable (Pic. 3), otherwise
operate on the adjustable feet (Pic. 4).
15_INSTALLING THE SPROCKET CASSETTE
ON THE DIRETO XR-T
1) Assemble the sprocket cassette on the freehub by
aligning the groove profiles.
- 2 spacers (Ref. B) are usually needed for the Shimano
®
SRAM 9 speed cassette (Pic. 5), 1 spacer for the 10
speed cassette (Pic. 6) and no spacer is required for the 11
speed cassette (Pic. 7). Depending on the cassette brand
you are using there might be some differences with the
aforementioned general data.
2) Using the torque wrench, tighten the lock ring supplied
with the cassettes onto the freehub body (Pic. 8).
CAUTION!
Strictly follow the instructions provided by the cassette
manufacturer with regard to specific installation
techniques, the need for additional spacers and torque
specifications.
NOTE: please contact your dealer if you have questions or
are unable to install the cassette. The warranty does not
cover any damage to the bicycle and/or DIRETO XR-T in
the event of incorrect installation.
On bikes with 130-135 mm (5,1 -5,3 inch) chainstay
you must insert the right chainstay adapter (Ref. D) (Pic.
9) ) and the left adapter (E) (Pic. 10). However, on bikes
(A)
with ø12 mm (ø 0.47 inches) thru-axle and 142 mm (5,6
(B)
inches) chainstay please check paragraph 17.
(C)
16_INSTALLING THE BICYCLE ON DIRETO
(E)
XR-T
(F)
(G) 1) Loosen the rear bicycle brake if necessary.
(H) 2) place the chain on the smallest sprocket and chainring;
(I) 3) remove the rear wheel from the bicycle.
(L) 4) Insert the quick release and the chainstay adapter (Ref.
C) on the DIRETO XR-T (Pic. 11) sprocket set axle hole.
5) position the bicycle by inserting the chain on the smallest
sprocket (Pic 12).
6) fully insert the rear dropouts of the bicycle on the edge of
the DIRETO XR-T sprocket set axle (Pic.13), paying careful
attention to the correct internal or external position, based
on the type of bicycle:
- External triangle adapter (Ref. C) for road and time trial
bikes (130mm triangle) (Pic.14).
- Internal triangle adapter (C) for mountain bikes (135mm
triangle) (Pic. 15).
NOTE: the knurled side of the triangle adapter (Ref. C) must
be facing the bicycle dropout.
- Securely fix the bicycle to DIRETO XR-T and firmly close
® /